Sono nuovo da aspettarsi e lo scripting in generale. Sto cercando di creare alcuni script per rendere la mia vita un po 'più semplice quando si estraggono le configurazioni dei dispositivi di rete. Sono riuscito a creare uno script base previsto per SSH su un dispositivo e salvare la configurazione.Script Bash/Expect per SSH
Desidero espandere e consentire allo script di connettersi a un numero di indirizzi IP anziché uno come quello che ho adesso. Ho un file chiamato list.txt
con alcuni indirizzi IP diversi con ogni IP su una linea separata.
Cosa dovrei fare per fare in modo che lo script expect si connetta a ciascuno di questi indirizzi IP ed esegua anche il resto delle attività nello script?
Ecco lo script che ho finora aspettare:
#!/usr/bin/expect -f
#Tells interpreter where the expect program is located. This may need adjusting according to
#your specific environment. Type ' which expect ' (without quotes) at a command prompt
#to find where it is located on your system and adjust the following line accordingly.
#
#
#Use the built in telnet program to connect to an IP and port number
spawn ssh 192.168.1.4 -l admin
#
#The first thing we should see is a User Name prompt
#expect "login as:"
#
#Send a valid username to the device
#send "admin"
#
#The next thing we should see is a Password prompt
expect "Password:"
#
#Send a vaild password to the device
send "password\n"
#
#If the device automatically assigns us to a priviledged level after successful logon,
#then we should be at an enable prompt
expect "Last login:"
#
#Tell the device to turn off paging
#
#After each command issued at the enable prompt, we expect the enable prompt again to tell us the
#command has executed and is ready for another command
expect "[email protected]"
#
#Turn off the paging
send "set cli pager off\n"
#
#Show us the running configuration on the screen
send "show config running\n"
#
# Set the date.
set date [timestamp -format %C%y%m%d]
#
#Test output sent to file with a timestamp on end
#-noappend will create a new file if one already exists
log_file -noappend /home/test.cfg$date
#
expect "[email protected]"
#
#Exit out of the network device
send "exit\n"
#
#The interact command is part of the expect script, which tells the script to hand off control to the user.
#This will allow you to continue to stay in the device for issuing future commands, instead of just closing
#the session after finishing running all the commands.`enter code here`
interact
Ho bisogno di integrare questo con uno script Bash? In tal caso, è possibile leggere una riga del file list.txt
, utilizzarla come variabile IP/host e leggere il successivo e ripetere?
È possibile configurare i dispositivi per utilizzare le chiavi ssh? Se sì, non è necessario aspettarsi affatto. –